BBTJQ - V-101 SPAR-GLOSS

  • MSDS: BBTJQ
  • Manufacturer: DUNN EDWARDS CORP
  • Product Name: V-101 SPAR-GLOSS
  • National Stock Number: 8010-00F005846
Product Identification

Product ID:V-101 SPAR-GLOSS
MSDS Date:01/01/1987
FSC:8010
NIIN:00F005846
MSDS Number: BBTJQ

Responsible Party
DUNN-EDWARDS CORP/LOS ANGELES, CA 90040

Emergency Phone: (213) 771-3330

Cage: 34483

Contractor
DUNN-EDWARDS CORPORATION
LOS ANGELES, CA 90040-2828 US

Telephone: 213-771-3330 EXT 2240

Cage: 34483

Ingredients

PETROLEUM DISTILLATES (NAPHTHA OR RUBBER SOLVENT)

CAS: 8002-05-9

RTECS: SE7449000

Fraction By Weight: 45%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 8990

Hazards

Effects of Overexposure:EYE, SKIN & MUCOUS MEMBRANES
IRRIT/HEADACHES/DIZZINESS/NAUSEA/LOSS OF CONSCIOUSNESS/CNS
DEPRESSION

First Aid

First Aid:EYE: WASH W/WATER FOR AT LEAST 15 MINUTES. IF IRRITATION
PERSISTS, SEE DOCTOR. SKIN: WASH THOROUGHLY W/SOAP & WATER.
INHALATION: MOVE TO FRESH AIR. IF BREATHING HAS STOPPED APPLY
ARTIFICIAL RESPIRATIO N. INGESTION: DON'T INDUCE VOMITING. CALL
DOCTOR

Fire Fighting

Flash Point:105F (TCC)
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:USE AIR SUPPLIED RESCUE EQUIPMENT FOR ENCLOSED
AREAS.
Unusual Fire/Explosion Hazard:LIQUID EVAPORATES WHICH SPREAD EASILY/CAN
BE IGNITED BY MANY SOURCES SUCH AS PILOT LIGHTS/WELDING.

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES, VENTILATE
CONFINED SPACES, KEEP PEOPLES AWAY. ADD ABSORNT SAND, EARTH, OR
SAWDUST AND RECOVER INTO A SUITABLE CONTAINER.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DON'T HANDLE OR STORE NEAR HEAT, FLAMES SPARKS, & STRO
OXIDANTS. STORE IN COOL WELL VENTILATED AREA.
Other Precautions:AVOID BREATHING VAPORS. INSPECT FOR LEAKY CONTAINERS.
INGESTION & VOMITING MAY CAUSE ASPIRATION OF HYDROCARBON LIQUID
INTO T LUNGS & CAUSE CHEMICAL PNEUMONITIS/PULMONARY
EDEMA/HEMORRHAGE

Exposure Controls

Respiratory Protection:WEAR APPROVED ORGANIC VAPOR OR AIR SUPPLIED
RESPIRATOR IF >TLV.
Ventilation:PROVIDE MECHANICAL VENTILATION TO KEEP Protective Gloves:SOLV RESISTANT
Eye Protection:GLASSES/GOGGLES/FACESHIEL
Other Protective Equipment:IMPERMEABLE APRONS/PROTECTIVE CLOTHING/HEAD
CAPS/SHOWERS.
Supplemental Safety and Health
MSDS DATE: 02/28/85. WT/GAL: 7.50

Chemical Properties

Boiling Pt:B.P. Text:314-387F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:49.1

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS. WILL DISSOLVE & SOFTEN SOME RUBBER/PLASTICS
Stability Condition to Avoid:HEATING, HIGH TEMP, POORLY VENTED HOT
AREAS, FLAMES & SPARKS
Hazardous Decomposition Products:CO, CO2, ACROLEIN, SMOKE, ACRID FUME

Disposal

Waste Disposal Methods:DISPOSE OF SPILLED & ABSORBENT MATERIAL
ACCORDING TO LOCAL, STATE, AND FEDERAL REGULATIONS. DON'T DUMP INTO
LAKES, STREAMS OR OTHER WATER SUPPLY. CONSULT WITH HAZARDOUS WASTE
REGULATORS REGARDING LAND FILL DUMPING AND OR INCINERATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.